space
Search Courses  in 

Get COURSE FEES & Discounts from BEST Instrumentation & Calibration Institutes in Chennai!

 

My Area

 

My Name

My Mobile Number

My Email ID

 

Best Institutes for Instrumentation & Calibration training in Chennai with Course Fees

List of 99+ Instrumentation & Calibration training institutes located near to you in Chennai as on November 18, 2019. Get access to training curriculum, placement training, course fees, contact phone numbers and students reviews.

 

 

training institutes Prolific Systems-Chennai
Chennai - T. Nagar
Best training institute
Prolific Systems-Chennai at T. Nagar - course counseling photo_3737 Prolific Systems-Chennai at T. Nagar - theory class photo_3738 
Address: No : 15, Mangesh Street, Opp. Sri Kumar Stores T. Nagar, Chennai - 600 017

 
training institutes Dimensional Academy of Engineering
Chennai - Kodambakkam
No Reviews. Write a Review
Best training institute
Dimensional Academy of Engineering at Kodambakkam - institute name board	 photo_18554 Dimensional Academy of Engineering at Kodambakkam - 	institute name board photo_15699 
Address: no:3/34 Dr.Ambedkar road kodambakkam Chennai-600024

HVAC, piping engineering, MEP, BMS, plumbing and firefighting, fire and safety, mechanical courses, electrical courses, structural engineering, process engineering, water and waste water engineering.
 
training institutes Best Caliber Creator
Chennai - Chromepet
No Reviews. Write a Review
training institute

 
training institutes Sim technologies
Chennai - Guindy
No Reviews. Write a Review
training institute

 
Profolic Systems
 
training institutes Techadviz
Chennai - Kovilambakkam
No Reviews. Write a Review
training institute

 
training institutes Aimore Technologies
Chennai - Medavakkam
No Reviews. Write a Review
training institute

 
training institutes Inventateq Training Institute - Chennai
Chennai - Velachery
No Reviews. Write a Review
training institute

 
training institutes TVS Training and Services
Chennai - Ambattur Industrial Estate
No Reviews. Write a Review
training institute

 
training institutes IPCS Automation
Chennai - Villivakkam
training institute
IPCS Automation at Villivakkam - class room	 photo_16821 IPCS Automation at Villivakkam - training room	 photo_16820 
Address: Sheffield Towers,3rd floor, A-1/97,Sidco Nagar, 4th Street, Villivakkam, Chennai - 600049

 
training institute
WIZTECH AUTOMATION SOLUTIONS PVT LTD at Anna Nagar - 	experienced trainers photo_16566 WIZTECH AUTOMATION SOLUTIONS PVT LTD at Anna Nagar - 	experienced trainers photo_16565 
Address: 102, W-Block, 2nd & 3rd Floor, 2nd Avenue, (Next to Indian Bank) Anna Nagar, Near Roundana bus Stop Chennai 600 040.

Wiztech Automation Solutions is the best Training institute in Chennai, started in the year 2006 and it extended its circle through providing the best education as per the global quality standards.
 
First << 1 2 3 4 5  >> Last

Instrumentation & Calibration Training Institutes in Chennai - by Location

Yet5.com Provides complete list of best Instrumentation & Calibration training institutes in Chennai and training centers with contact address, phone number, training reviews, course fees, job placement, course content, special offers and trainer profile information by area.

 

 

 

Learning Instrumentation & Calibration course in Chennai - Benefits, Advantages & Placements.

We have identified the benefits of learning instrumentation--calibration- course in Chennai.
Instrumentation & Calibration training in Chennai is part of Automation & Robotics training course class, Calibrating an instrument is to ensure that an instrument works properly within accepted tolerances such that a certain known input is able to produce the expected known output, making it precise. Any instrument such as voltmeter is subject to initial measurement tolerances due to the limited accuracy of its components. The purpose of calibration is to trim the inaccuracies from the instrument by comparing it to a reference standard, or at least a device that is calibrated already to a known reference standard. The calibration can be done with variable components such as trim resistors and pots or by digital computation and storage of correction factors. As the instruments key components may drift as they age, recalibration is recommended on a yearly or sometimes bi-yearly basis. Calibration is usually done with all the instruments being traceable to the volt reference at the NIST labs and in current calibration when used.

Calibration defines the accuracy and quality of measurements recorded using a piece of equipment. Over time there is a tendency for results and accuracy to ‘drift’ particularly when using particular technologies or measuring particular parameters such as temperature and humidity. To be confident in the results being measured there is an ongoing need to service and maintain the calibration of equipment throughout its lifetime for reliable, accurate and repeatable measurements. The goal of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment. Calibration quantifies and controls errors or uncertainties within measurement processes to an acceptable level.

Calibration is done between two instruments when we are out of any further inter-conversion of their output signal. They help us in infer the measurements indirectly from another measurements. It can be compared using primary instruments, or secondary instruments or any known output of instruments. The calibration has three parametric process. First is to arrange and choose an appropriate standard and scale of measurement. Second is to choose the correct method and equipment for calibration. The third is to calibrate tabulate record variations and adjust and corrections. Certificate of calibration with proper tabulation is a must.
Chennai is the capital city of Tamil Nadu. It is a place of culture mix , the city has a lot of engineering colleges which witnesses a lot of students from other parts of Tamilnadu as well as from other states . The city comprises of reputed colleges like Anna university, IIT madras, SRM etc. the city also has the Asias largest IT park, THE TIDEL PARK and other IT parks like DLF IT park, Thamarai Tech park. The city provides immense opportunities to students by providing a safe environment and a rich education. It also consists of institutes which are famous and reputed like NIIT, TIME, SEIMENS. The cost of living is affordable and the tuition fees is low and is reasonable according to the course.
You have travel connectivity to instrumentation--calibration- course educational training institutes in Chennai. The city is connected by air,bus, train, metro, auto rickshaw. The city has a lot of MTC busses connected between the areas of the city. TNPSC connects the districts within the state. The Train facilities is available to ply between the areas in the city as the train frequency is available for every 5 minutes. The Chennai domestic and international airport connects you within the country and out.

 

 

 

Instrumentation & Calibration course Content / syllabus in chennai

Below is the Instrumentation & Calibration course content in chennai used by the training institutes as part of the Instrumentation & Calibration course training. The Instrumentation & Calibration course syllabus covers basic to advanced level course contents which is used by most of Instrumentation & Calibration training classes in chennai .

 

Health & Safety

1.Introduction
a.Air Supply, Electrical Supply, Grounding
b.Instrument Identification and Line Symbols
c.Process & Instrumentation Diagrams (P&IDs), Control System Definition, Logic Diagrams

2.Units & Standards:
a.Control Loops
b.Overview, Control Function Considerations
c.Control Modes, (On-Off, Modulating, PID COntrol)

3.Final Control Elements:
a.Control Valve Types, Valve Postitioners
b.Control Loops

4.Process Control Methods:
a.Control Modes (ON-Off, Modulating, PID Control)
b.Control Types (Feedback, Cascade, Ratio, Feedforward)
c.SCADA

5.Control Valves:
a.Valve Bodies, Actuators, Valve Positioners
b.Instrument Configuration and Diagnostics Systems
c.How to Document Instrumentation including Tag Numbers, P&IDs, Loop and Logic Diagrams
d.Control Centres:
e.Overview, Design, Physical Aspects

6.Enclosures:
a.Overview, General Requirements
b.Electrical, Pneumatics
c.Temperature and Humidity Control

7.Alarms and Trips:
a.Fail-Safe and De-Energise-to-Trip

8.Types of Instruments:
a.Flow (Switch, Alarm, Feedback) Flow Measurement
b.Temperature (Switch, Alarm, Feedback) : Temperature Measurement
c.Pressure (Switch, Alarm, Feedback): Pressure Measurement
d.Weight, Level Measurement, Contents Measurement
e.Conductivity, pH Measurement
f.Density, Viscosity, Current, Voltage, Amperage, Capacitance, Resistivity, Inductance, Frequency
g.Vibration
h.Mosture

 

TrainerDesk Training Jobs

 

Training course fee & Discounts