About

Dear Friends I am delighted to have this opportunity to introduce you to Quickstep Computer Centre Bangalore. We have long experience of helping international students to improve their skills through high-quality, training On Mechanical CAD, Civil-Architectural CAD, Electrical CAD, Data Science, Cloud Computing, AWS, Azure, AI, ML, NLP, Big Data, React Native, Software Testing , Python ,SAP, SAP HANA Digital Marketing , Foreign Languages French, German, Spanish , Arabic, English language programs. Our institute, established in , has branches in all major areas of Bangalore, Mysore and some other cities of India. We are one of the largest language training institutes in India with many MNCs, well known Indian companies and other organizations as our clients. Please Visit website Each year Quickstep welcomes a large number of Overseas students from all over the world. We would therefore request you to consider favorably the application of the under noted student who wish to apply for visa to come to India for CAD, IT, ERP & learning English with us. We enclose copies of the following documents to enable you to consider the application. 1. An ISO Certified Institute 2. In the private sector we are the only Institute in Bangalore to have been accredited by the National Accreditation Board for Education and Training( NABET) --Quality Council of India (Government of India) We are one among the four Organizations in India to receive this accreditation from Government of India so far. This accreditation is the only certification recognized by the Government of India and all State Governments. 3. Registered with Department of Education ( Government of Karnataka) 4. Certificate of Registration of Trade Mark( Government of India) 5. Registration Certificate( Government of Karnataka) 6. Registered with Department of Industry and Commerce ( Government of Karnataka) 7. Registered with Department of Labour & Employment. ( Government of India)

Students Trained

1556

Address
#1 Shree complex, 1st Floor 80ft Main Road , Al - BEK , Health & Glow
R T Nagar (Bangalore) - 560032
Contact by Phone
Website

https://www.quickstepblr.com

Year Founded

2011

Enquiry
1
2
3
Google Map
Closed
Closed today
  • Monday

    9:00 am - 6:00 pm

  • Tuesday

    9:00 am - 6:00 pm

  • Wednesday

    9:00 am - 6:00 pm

  • Thursday

    9:00 am - 6:00 pm

  • Friday

    9:00 am - 6:00 pm

  • Saturday

    9:00 am - 4:00 pm

  • Sunday

    Closed

  • March 18, 2024 3:59 am local time

Placement Percentage

64

Alternative Numbers

7026560666

  • Prter Jhon
    December 25, 2020 at 5:54 pm

    Hi guys I BE student I just finished C,C++, Java and python course in this Coaching centre , Its just an amazing experience. Training were awesome, excellent training style , Flexible time , Highly experienced trainer . very cooperative and friendly environment , I am completely satisfied while pursuing training I have learn many things which is I didn’t know. Purely project based training
    and give lot of logical programs as tasks which improves our coding skills. It is one of the best Coaching centre.
    Training is awesome.

  • Shavaprasad
    August 9, 2018 at 5:21 pm

    Excellent tally course , good teaching, i am really happy.

  • Ranjitha k
    July 26, 2018 at 1:14 pm

    i have done python course in this institute, i got very good experience with trainer, i got excellent training with project on python , they help me get a job thaks to allno

  • jhon
    July 26, 2018 at 12:02 pm

    Hi… i have done interior Design course i felt this one of the best place to do Interior course , because they are teaching with real time project and i have learn many things while doing course , its purely prickle class where we can learn may things , Its purely computerize calss, Using CAD software , While doing course providing projects that can make students perfect , trainer are really good having more experience from same domain, they have arranged internship for me , Thank to Quickstep and my trainers who are all supported me. no

  • C Selva Meena
    July 25, 2018 at 7:28 pm

    Hi I joined for Python and AngularJS this course fee was offer able quality tanning whit Project , trainee is highly experienced, way of teaching good , Cooperative, Friendly, i am happy with service . thanks to all

  • JOHN
    July 25, 2018 at 5:59 pm

    helloo… friend , this John i have done Tally ERP 9, Excel , SAP course , this course are really interesting , Friendly environment experienced teacher i felt this the one of best institute i am really happy ,i wanted to refer my friends who are willing to do this course because i really got excellent services with offer able cost thanks to quickstep teamno

  • Rizwan
    July 25, 2018 at 1:57 pm

    hi, i like teaching of CADD, i learn many things while doing course , and i am working in company as the designer, it help me lots , good teachers and i like environment of institute , no

  • sukanya
    July 25, 2018 at 1:49 pm

    Hi friends I have done C,C++,java Python course , I have a good experience with this institute , I am really happy, Because end of the course they help me to get internship, I would like to suggest college students who are all looking for course with internship this is the one of the best institute . Thanks to all no

  • Naushad ali
    July 10, 2018 at 6:17 pm

    I took demo sessions at several institutes in Bangalore but selected this one as it was the best here. During my course, I got all the hands-on experience to all the They offer a valuable course at a very affordable price. Want to thank Quickstep team for providing all the knowledge and practical exposure in a very friendly way.

  • Afjal
    July 10, 2018 at 1:38 pm

    Hello … friends i am a student of Quickstep CADD Centre, I learn Civil CAD after my civil eng….., I had done course my trainer had real time experience, he tough me very simple way, i could understand about the software , i enjoy , environment was excellent , they arranged internship for me. and now i m getting real time experience, i m so much happy. no

  • Mehrin
    July 10, 2018 at 1:11 pm

    hi, i have done SAP fico course in this institute , i got really good experience , because trainer was wel experience , she made me to understand perfectly , and being a fresher i was finding difficulty to get a job but they help me lot.. to get into company ,

    thanks to madam.no

  • Syed
    July 9, 2018 at 12:35 pm

    Joined to quickstep for SAP ABAP , since i was fresher , i did this course , As i expected this course really help me out to get into corporate world , they really help me , finely i got a job in one of the MNC, I m really happy. Thanks to quickstep ttam

  • priya
    July 9, 2018 at 11:52 am

    i have done python course in this institute, i got very good experience with trainer, i got excellent training with project on python , they help me get a job.

  • Mohammad Ashraf
    July 9, 2018 at 11:40 am

    techers are good,they thought me very well traners are all experienced and price are very offerable.

  • SYED kHALID
    June 23, 2017 at 5:23 pm

    Hi, I have done C, C++, Java course here , I have very good experience while doing course, because faculty was really good, i understand every concept , and they help me to get a job. thanks to this Institute and sir.

  • pooja kulkarni
    March 17, 2017 at 6:04 pm

    Hey i have done my training in cad really its very good n best institutions for cad

  • lavaniya mk
    March 8, 2017 at 4:47 pm

    Hi i have done my course in tally ERP. its very good teaching n it is in very good price also and its very good institutions…….

  • shruthui kumar
    March 8, 2017 at 4:33 pm

    I have done my course in CAD really its very good institutions for CAD. be4 i went to other institutions there was not proper teaching no response only but this is very good n best institutions…

  • Narayan
    March 8, 2017 at 4:14 pm

    Hey i have my training in IT technologies really my training and as well as trainer.. Thank You QS

  • Javeed khan
    March 8, 2017 at 4:10 pm

    Hey i have done my training in CAD. really its very good training and teaching..

  • aliya
    March 8, 2017 at 4:07 pm

    i have done my training in SAP-MM. i got a good training and well placement here.and its good institutions for all course…

  • asfiya
    March 8, 2017 at 3:46 pm

    Hey i have done my course here in CAD.i got a very well training n i got a good efforts from training n trainer also. really very good trainers are there in Qs institution n v can gain more n more knowledge here.Thank u

  • pooja
    March 8, 2017 at 3:39 pm

    Hey i have done my training here in diploma in programming. really its very good training institution,Thank you Quick Step

  • vanitha
    March 8, 2017 at 3:35 pm

    Hey i have recently done my course in CAD. its very good institution for learning CAd……..

  • umshree
    March 8, 2017 at 3:29 pm

    Hey hai everyone i have done my course in SAP-FI-Co. really its very good n well trainers n very good understanding towards to students n very good training institution for SAP…

  • yojana
    February 6, 2017 at 5:37 pm

    Hi, i have done my training here in CAd i am really happy with my training and placement…
    Thank you qscc

  • Bujjibabu
    February 6, 2017 at 5:32 pm

    Hi, i have done my course in MS Excel and i would to tell who r welling to do they can do this in QUICK STEP CENTER…… they teach very well

  • Mr amith kumar
    February 4, 2017 at 3:23 pm

    Hey i have done my training here in CAD i would like to tell my training Thanks a lot for helping me in AUTO-CAD.

  • Nagendar kumar
    February 4, 2017 at 3:19 pm

    Hello, i have done my course here in SAP-PP, i got a best training here. be4 alao i was doing in CMS institution there was not a proper way for teaching they were not giving any method but here i got a real time project plus training…..Thank you QS

  • Mr Maranajan
    February 4, 2017 at 3:15 pm

    Hello, i have done recently my training here in CAD-Auto-cad,2d,3d.isomatic. and 3ds max. really its very well training it was and i come to know everything about it..Thank you so much QSC

  • Mr Ripali
    February 4, 2017 at 3:08 pm

    Hello, i have done my training here in CAd in civil. i am happy from this training and i would like to tell others also who are interested to do this course …this is the best institution in R T Nagar Bangalore

  • Hanam Gowda
    February 4, 2017 at 3:03 pm

    Hello everyone i have done my training here in SAP-MM.i would like to tell thanks for my trainer and institution. its very best center to have a SAP training…Thank you QSC

  • Mr gunashree BN
    February 4, 2017 at 2:58 pm

    Hi,i have done my course in SAP. really its very good and good institutions in Bangalore for SAP-FI-CO

  • Mr.Ashish
    February 4, 2017 at 2:54 pm

    Hello, i have done here my course in CAD. really its very best institution for learning CAD…

  • Sanjith kumar
    February 2, 2017 at 6:15 pm

    Hi, i have done my training here in SAP with placement. really i am very happy from this institution Thank You sooooooooo much Quick Step ur the BEST

  • PANDURANG
    February 2, 2017 at 6:11 pm

    Hi,i have done my training course here in CAD really its very good and best institution in Bangalore….

  • srinivas
    February 2, 2017 at 6:08 pm

    Hello,
    Sir/Madam
    Thank You for giving me good opinion on my career , and for my SAP training.Thank You QSC

  • Shravarkime
    February 2, 2017 at 6:04 pm

    Hello, everyone i have done my training here in SAP-SD. with a placement i am really very happy from this institution. most thing is this is not like other institutions, very different and good hope and trust-able. Thank You Quick Step

  • Shivam kumar
    February 2, 2017 at 5:56 pm

    Hi, i have done my course in SAP. Fi-Co. i would like to Thanks a Quick Step Center because really its very good and good institution in Bangalore.

  • Eliza priyadashrine
    February 2, 2017 at 5:53 pm

    Hello, friends i have completed my training here in E-Tabs. really its very good and best institution for all types of CAD software..
    Thanks a lot Quick Step

  • Sakthivel
    February 2, 2017 at 5:34 pm

    Hi, i have done my training here in CAD. i have gain more and more knowledge about it and i have got a very good training here…Thank You quick step CAD training center…

  • Bharat kumar
    February 2, 2017 at 5:00 pm

    Hey i have done my training course in SAP..PP. really its very good and best training for SAP
    well trainers and teaching. Thank You

  • Basava.Raj
    February 2, 2017 at 4:56 pm

    Hi, i have done my course in CAD in Revit. really its very good and good institution for CAD….

  • Abdul
    February 2, 2017 at 4:51 pm

    I have done my training course here in SAP.MM with placement talk. really its very good center in R.T. Nagar and well experienced trainers and good understanding.. Thank you.Quick Step

  • Tejav
    February 2, 2017 at 4:46 pm

    Hi, i have done my training course here i SAP.SD.really its very good institution and very good teaching. very best cost and good skills in studies.

  • Leela
    February 2, 2017 at 4:41 pm

    i have done my course in computer basic. i come to know all things about it and i am very happy after taking training from here. really its very good center n well trainers….

  • sachin
    February 2, 2017 at 4:29 pm

    hello,everyone i have done my course here in IT field. that is DIP. which is used for a software companies and i join with a commitment of a placement and i really happy with this institution,Thank you so much quick step

  • midhun
    February 2, 2017 at 4:24 pm

    Hi, everyone i have done my training course here in Tally ERP 9.3. really i come to know everything of this subject and it is a standard institution and very good trainers very understandable for students….
    Thank you quick step

  • Renju
    February 2, 2017 at 4:10 pm

    this is renju here i have done my course in CAD here with the help of placement. i am happy with this institution really it gave me a life in a good software company for lifetime hope…Thank you QSC

  • Ms.sunitha
    February 2, 2017 at 3:44 pm

    Hi,recently i have done my course here in SAP.really its very good institution and well training as well as trainers….

  • Dipali
    February 2, 2017 at 3:35 pm

    Hi, i have done my training here in CAD. i got a more knowledge about it really it is a best institution of the world.specailly in Bangalore..
    Thank you quick step

  • Mr sunil
    February 1, 2017 at 4:53 pm

    Hi,i have done my course in CAD here i would like to tell everyone really its very good n good institution in bangalore

  • Rukusar
    February 1, 2017 at 4:49 pm

    Hello, recently i have done my training course here i would like to tell everyone that really its very good institution in Bangalore….

  • preethi kumari
    February 1, 2017 at 4:41 pm

    Hey hello friends i have done my course in SAP=PP. really i am very happy from this center because it has give me a lots of efforts in my studies so Thank you very much Quick Step

  • Uday kumar
    February 1, 2017 at 4:36 pm

    Hello everyone i have done my training here i would like to tell everyone its really very good institution in Bangalore…really its very best institution to do CAD courses…

  • MD shariff
    February 1, 2017 at 4:27 pm

    I have done my course here in SAP..with 100% placement really its very good institution for learning all types of courses here…
    Thank you Quick Step to making my hope.

  • Asma banu
    February 1, 2017 at 4:22 pm

    Hello, i have done recently done my course here in Computer Basic..really its very good institutions. were i have learn everything really i was not knowing anything about computer.after learning from here i come to know everything….
    Thank you quick step

  • MD.Tufeel
    February 1, 2017 at 4:15 pm

    Hi,everyone i have done my training here in CAD.Really its very good center to do CAD well experienced trainers and well teaching also really its more good and best…

  • bharat
    February 1, 2017 at 4:10 pm

    This is kumar i would like to tell everyone that.This is a best institution for SAP and all courses even IT software Training…
    Thank you

  • isheta
    February 1, 2017 at 4:04 pm

    Hi
    this is isheta here i would like to tell everyone that this is one of the best institution in R.T Nagar Bangalore for CAD

  • Mr. praveen
    January 4, 2017 at 5:03 pm

    Hello everyone this is praveen here i would like to tell this is the BEST-BEST institution in Bangalore….Thank You QSCC

  • Imran
    January 4, 2017 at 4:59 pm

    Hi,
    i have done my course in SAP.
    really its very good training institution for SAP.i have done my course in FI-CO.i have got a more knowledge about it really its very good and good institution in Bangalore..
    Thank You

  • Imran khan
    December 27, 2016 at 5:08 pm

    Hi, i would like to tell everyone that this institutions is the one of the best in this Bangalore….
    Thank You.

  • Preethi Readdy
    December 27, 2016 at 5:04 pm

    Hi,
    i have done my Civil Engineering. and i have joined to learn here AUTO-CAD,3ds Max and E-Tabs. with placement. i am really satisfy with this and happy.This organization is the one of the best in this world for CAD…Thank You
    .

  • Aditi sharma
    December 27, 2016 at 4:52 pm

    I have done my training in SAP-CRM courser with placement. really i am very happy and well satisfy. really its very good institutions.Thank You so much for giving me a support and improving my skills..

  • Athiya kousar
    December 27, 2016 at 4:33 pm

    Hi,i have done my course in CAD.its really very good institutions for CAD. i am really satisfy with training and placement..Thank you quick step…..

  • Shankar.mk
    December 27, 2016 at 4:26 pm

    Hello, friends i have recently completed my Courses in SAP-FI-CO and Tally E R P tools. i really very happy from this center. i have gain more knowledge about it and i have got a placement also. and training also very well and good and good trainers very good skills…..
    Thank You..

  • kat
    December 27, 2016 at 3:57 pm

    i have done my course in CAD. really its very good institution. the trainers are very good and very good understanding to us…

  • Md Niyaz
    December 27, 2016 at 3:51 pm

    Hi,i have completed my training course in Revit Mep .. really its very good training. i would like to refers my friends also to go and learn here.This is a best institutions for CAD..

  • priya k
    December 27, 2016 at 3:29 pm

    Hi, i have done my SAP-FiCO i really very happy with a training because it was really very good and good. it was class room training, very good practicals also very good. very good trainers,i will refers to everyone who want to learn this course go and learn in Quick Step Training Center..

  • Ravi chandra
    December 27, 2016 at 3:14 pm

    Hi, i have done my Auto-Cad training.And my trainer was the best for me. i have learn more about CAD. really this institutions is the best for CAD.and its really very best.Thank you Quick step

  • Kaviya ms
    December 27, 2016 at 3:04 pm

    Hello, everyone i have done my course in “DIP” Diploma in Programming.really i come to know everything about it. i have gain more knowledge about it.really this is a best institution for software training course.well trainers and best teaching…..

  • MAHEMA.MK
    December 27, 2016 at 1:18 pm

    Hi,i have recently done my course in CAD here.really i am very happy from this institution.it has give me more knowledge about AUTO-CAD,and trainers are really very good and understandable to students and towards our studies also.. really its very good organization for CAD…..Thank you.QSC

  • readdy mk
    December 26, 2016 at 4:08 pm

    Hi, i have recently completed my course in SAP-FI-Co.really its very good institution of Bangalore.Really we can gain more knowledge here and trainers are really very good very understandable Thank you…..

  • rahul kumar
    December 26, 2016 at 3:54 pm

    Excellent,training center of the world.for CAD courses.
    Thank you…

  • Ms shanta
    December 24, 2016 at 4:07 pm

    Hi i have done my SAP-FI-CO. really i am very happy from this institution very good and good. the main thing its not like other institution.because some are there which gives all fake training and incomplete response. but Quick step is really very good>Thank you so much to giving me a very good training and making my future…Thanks…;

  • Ms kushi
    December 24, 2016 at 3:44 pm

    Hi,I would like to tell Quick Step is the “Best” institution in Bangalore……..
    Thank you so much..””..

  • Sanjeev
    December 24, 2016 at 3:39 pm

    Hi, i have done my course in CAD. really its very good and good training. no words to tell for this institution in this world…………………………………………..Thank you.Quick step

  • Archanna
    December 24, 2016 at 3:07 pm

    I have done my computer training here. i would like to tell everyone who are looking for basic-training or tally-training they can learn here and its very good and good training more knowledge we can gain from here.very good communication well understandable to us very good and good institutions…..Thank you QSCC

  • Anuradha
    December 24, 2016 at 3:01 pm

    Hi, recently i have done my course in SAP-PP. I would like to refer others also to do this training from here because really its very good and good institution in this Bangalore.very good communication good skills good teaching and well trainers very good understanding to students.Thank you.QS

  • Mr.shyam
    December 24, 2016 at 2:46 pm

    Hi,everyone i have done my CAD course in Electrical-CAD.its very good organization and good communication,skills good trainers well teaching,good and good institution……Thank you to making my career……Thank you.Quickstep

  • Ananthramaiah
    December 24, 2016 at 1:37 pm

    Hello,everyone i have recently completed my SAP-M.M. training here because its very good and good training,well trainers good teaching more than other institution its very good here to learn. very good understanding good speaking towards students and good skills…..Thank you.

  • laletha
    December 24, 2016 at 1:30 pm

    Hi,I would like to refer others also to learn CAD here because its really very good training and good institutions of learning very understandable good communication and good skills really its very good and good………………..Thank you Quickstep CAD training center…….

  • manoj readdy
    December 14, 2016 at 5:06 pm

    Hi, recently i have done my course in SAP in M M.I am very happy after doing this course because .i got a more knowledge about it and about M M also.really its very good and well trainers well method also really its very good and good.Thank you

  • mani kantha
    December 14, 2016 at 4:58 pm

    Hi,i have done my course in CAD in Architectural. i would to refer others also because its very good to study here really its very good organization of CAD and very good trainers good explanation.i am very happy that i got a knowledge about it and more information about CAD.Thank you so much Q S

  • Mahesh patil
    December 8, 2016 at 4:40 pm

    Hi, Recently i have done my SAP-FI CO.really its very good institution to learn the the course in Quickstep.i got a more knowledge about it.And they place me job also in IBM company.Really its very best institution.they will really help a lot in everything and good trainers also very helpful and very understandable to students and towards.Thank You Q S

  • Sunil
    December 8, 2016 at 4:27 pm

    Hi,i have done my course here in CAD and i would like to refer all who are looking for CAD training.really its very good institution to learn,very best and best organization.Thank You……

  • Nirupama.v
    December 3, 2016 at 1:55 pm

    Hello,everyone i would to tell you all go and join the Q S because i have done my course here SAP-P P. really its very good training and good skills.Thank you so much QS and my trainer to help me out.trainers are very understandable and very good thoughts towards studies.really i am very happy i got a job Thank you…

  • Sooryakant
    December 3, 2016 at 1:46 pm

    Hi, recently i have done by AUTO-CAD.really its very good institution for doing CAD.very good understanding to students and good method of teaching its very good organization compare to others.Thanks a lots Quickstep

  • Vibhu Verma
    December 2, 2016 at 3:06 pm

    Hello,friends i would like to refer you all to do the courses here and its very good institution and good skills and training center in India.very good timings and rules and regulation good trainers,very understandable to students.i have done my 2PUC in commerce and i have join for M I S course. which mean “Management Information System” i came to know everything about it really its very helpful to me.Thank You So much ………

  • Taranroom
    December 2, 2016 at 2:50 pm

    Hi,i want to refer everyone to go and do the courses here.really its very good institution and well education plus training. very good department of training center. i have done my REVIT in CAD.Really its very good and good.Thanks

  • V.Pradeep Reddy
    December 2, 2016 at 2:39 pm

    Recently,i have done by course in AUTO-CAD & 3ds Max.i would like to refer everyone. its very good institutions and very good and good skills,methods and teaching and training.And trainers are very understandable and good education.really i want to tell everyone.Thank you……..

  • Hummayoun
    November 30, 2016 at 4:05 pm

    Hello,i have recently completed my course in mechanical-CAD. really I am very happy after learning this course.. its very good teaching and trainers very helpful and most understandable to me..i would like to refer others also to go and join here..
    Thank you so mush “Quick Step Center”

  • Vinaya s
    November 26, 2016 at 4:38 pm

    Hello, i have been join the course here for “Computer Basic”. really i was not knowing anything about it. After joining here i got a all knowledge about it. i specially to my trainer Thank You mam and Q S.To give me more attention to my career and to teach me very well to make me perfect in Computers.Thank you so much.really its very to organization and very good trainers.Thank You Sooooooo much

  • D.sandhya
    November 26, 2016 at 4:18 pm

    Hi, recently i have done my course in “Diploma in programming”.its very good teaching and i would like to refer others also because i have got a more knowledge about it really i am very happy.i was not knowing about it anything.my trainer teach me very well he gave me more efforts in my studies and help me out to get a job in IT company.Thank You

  • Manesh kumar
    November 26, 2016 at 4:07 pm

    Hello, i have done my SAP in ABAP training here, i would like to refer others also because its very go organization really i am very happy after learning this course from here i got a more knowledge about it. as soon i completed this, this institute refer me to good company.its very good organization.Thank You

  • Arpita
    November 26, 2016 at 3:59 pm

    Hi.everyone,i would like to tell to my friends to go and join Q S. because i have done my SAP course in M M module.really it has help to my career and more knowledge i got it.most Thanks to my trainer he has trained me very well.Thank you so much

  • Bhavaya Shree
    November 26, 2016 at 3:43 pm

    Hi, i have recently completed my course in Auto-CAD,3ds Max. really i am very happy after doing this course from QS. trainers ares very good and good.specially CAD trainer. he is very understandable and very honest to students. we can gain more knowledge and more technique about it. Thank You so much Quick Step

  • Praveen
    November 26, 2016 at 3:35 pm

    Hi, friends last week i had completed my SAP in FICO module. from Qs, really i am very happy after learning this course.it has help me a lot to get a job more Thanks to the trainer to teach me this and giving me more knowledge about it.really its very good organisation, i would like to like refer to all my friends to go and join there.because its very good teaching and methods,skills.really i am very impressed.Thank You

  • Tunisha
    November 25, 2016 at 3:33 pm

    Hi, me from pune i came to learn here CAD. Then i step into Quickstep. i got a very good concealing here and then join the class for Revit-Auto-Cad-3ds max. Really its very good teaching and trainers very helpful and most understandable to me. really its very good i am very happy.Thank You Q S

  • Ram Krishna.vm
    November 25, 2016 at 3:22 pm

    Hello, i have completed my course in Mechanical-Cad.its very good and best center to learn here. teaching methods is very good very understandable to learn easily. we can get a more knowledge about it and good skills here very good in timings and rules for students, very good trainers>Thank you….

  • V.Pradeep
    November 25, 2016 at 3:05 pm

    Hello,me from Tumkur recently i have done my course Rev it from this center, i am very happy to tell “Thank you” for Q S.specially for trainer to teach me very well and to understand my needs and giving me more efforts.once again thanks for everyone to help me out..Thanks

  • Zuber Khan
    November 25, 2016 at 2:47 pm

    Hi, i have done my Auto-Cad,Catia from Q S i would to tell everyone go and do this course here because its very good and good institute for CAD courses.They teach you very good and we can gain more knowledge from trainers because they teach us in different methods.skills and good understandable.Thank You

  • Varshith.k
    November 25, 2016 at 2:29 pm

    Hello,everyone i would like to thanks . He is the best trainer to teach Auto-Cad. He has he has gained me a more knowledge about it. I really thanks to him to get me a job and help.Thank You QS

  • Ajmal Baig
    November 25, 2016 at 2:22 pm

    Recently,i have done my S A P course in this center,i would like to inform my friends to go and join in this center.because its very good and i have gain more knowledge about it.i had got a job from the help of this institution.i am very happy in my life. Thank you QS

  • Duraimurugan
    November 23, 2016 at 7:02 pm

    Recently i have completed my course in Rev-it(MEP). from quick step computer center. i would like to refer others also to go and join here. because its very good skills and trainers.help a lot in every point and also its very good center compare to others centers.It gave me a very good skills and knowledge about it. Thank you.Q S

  • Meghana.k.p
    November 23, 2016 at 6:50 pm

    Hi, I have done my courses in (Auto Cad-3ds max) from QS. i am very happy to tell others to go and join here. after complication of this i got a job in a company as a (draft men). i would like to tell the director Thanks a lot for helping me and for my future.Thank you

  • Syed bhruddin hussaini
    November 23, 2016 at 6:41 pm

    Hello,everyone its me syed recently i have completed course in( SAP in SD). I would like to refer other friends also to learn this course.because QS help a lot in everything and its has gave me the good communication and skills about SAP. Thank you (Quick Step)

  • Mohammed rafique hussain
    November 23, 2016 at 6:29 pm

    Recently i have completed my studies in Architectural,after that i have join for course Architectural/Structure Rev-it from quick step cad center
    it has help me a lot in everything and i have gain a more knowledge about it.well methods,new technology,styles. well trainers. Thank you Q S.

  • abdul waheed khan
    November 23, 2016 at 6:20 pm

    Hello,friends recently i have completed my electrical cad course from Q S C. Really i would like to refer to others who are welling this course to do.Its very good and we will get and gain more knowledge from here trainers are very helpful and well experienced trainers.Thank you QS

  • sakeenah i
    November 21, 2016 at 5:31 pm

    Hello myself Sakeenah,recently i have done my course from QS.i am very happy because i have got a job in MNC. I would like to refer to my friends to go and join here. well teaching,trainers,methods,environment. Really its very good center. Thank you, miss this center so much…….

  • Kavita mk
    November 21, 2016 at 5:22 pm

    I have completed my 2PUC in eCommerce. then i have a plan to do the computer course. then i got a center SQ. it have been help me a lot in every kind of knowledge and training is very good and trainers also very helpful. i would like to refer everyone who are welling to do computers course. because it has made my career Thank you so mush “Quick Step Center”

  • Tehniya.waseem
    November 21, 2016 at 5:13 pm

    Hi recently i have done my B B M.and i have done my course in SAP in A B A P. I was searching for a job in MNC company. so after doing this course this institution place me in good job in Accenture company. now i have a successful career in my life. Thank you QSCC and Trainers to help for me.Really its very good center. Thank you

  • misbha
    November 21, 2016 at 5:01 pm

    myself is Misba recently i have done my 2PUC in computer science. then i have done my IT Training from Quick Step Computer Center. I have gain the more knowledge from here and its very good center,teaching and trainers also very helpful. At last after finishing our course they will arrange the interview in center itself. Thank You

  • shabreen taj k
    November 21, 2016 at 4:44 pm

    hello everyone i would like to tell you to go and join in QSCC. because recently i have done my course in this institute and i got a good knowledge about it and i have got a job in Civil Cad.In a company and i would like to refer to others also to go here and join.About teaching its very good and well trainers.and helpfull.Thank you

  • mahesh mk
    November 21, 2016 at 4:33 pm

    Hi friends recently i have completed my master diploma in civil – architectural cad course here.while doing this course i have been learn many things about CAD. Its help me a lot to get a job and teaching is very good and help a lot to students and i would like to refer to people who are welling to do this course. Thank u QSCC

  • TANIYA
    November 21, 2016 at 4:13 pm

    Hello,friends i have done my Mechanical Cad course in this institute. They have given me a very good services and attention.i really like to tell other students also to go and learn here. I was welling for job also they give me a good job in a company and also i have attended it was a very good movement. Thank you..

  • Sharath Babu
    November 17, 2016 at 7:04 pm

    Recently I have completed my MBA marketing. i was searching for a job but i did get, one of Friend suggest me to me to do SAP Course so, i have done this course in this centre, it help me lots to get a job , while i was doing course i have learn many things, this institute has very good trainer they taught me very wl, I am really happy . because of this training institute i got very good job in one MNC .

  • Prashant singh
    November 17, 2016 at 6:44 pm

    Hello friends i have done mechanical Cad course in this institute . they have given me such a good servers. i am really like to refer other students . who are all welling to do CAD course , i found this is one of the best institute . End of the course they arranged interview also. Environment also good. Thanx to all .

  • Srinivas naido
    August 26, 2016 at 6:43 pm

    I have completed master diploma in civil – architectural cad course here, with revit mep, it is very good coaching centre . after my B.E, i have joined this coaching centre . they trained me well. because of this coaching centre i got a job. this people has placement also, they help me lots to get a job . i am really thankful . This is best coaching centre for CAD. i would like to refer to people who wants to do CAD course . good training. good people. good environment .

  • Munjula .R
    August 26, 2016 at 6:21 pm

    Hieee friends, i m a mba H.R. i have done SAP H.R course,in this institute . i had a excellent trainer , she had a good experience in teaching, her teaching is really good , she made me perfect in SAP HR module . i have got more confidence and motivated me also , this institute has very good trainer, good environment , friendly helpful. They give more important to the students. This is the best place to learn any course. thx to qsc and mam also.

  • Imran Pasha
    August 26, 2016 at 6:03 pm

    I have learn C,C++, Java. I am just 2015 pass out student (BE) I did course here and i have very good experienced with this people. because while doing course i have taught by one of the best trainer , who had a very good experienced. he teach me very wl. and they have arranged interview at institute itself. company had come for candidates selection. i also have got selected . and now i am able to start my job in company as the programmer. i found this is the best tanning centre with placement. i am very thankful to sir. and quickstep for giving me good training .

  • Chandrika Prakesh.
    August 26, 2016 at 5:44 pm

    This is Chandrika here i did my master diploma in mechanical CAD course , About this institute its a very good institute . i can say only one word EXCELLENT. this institute has best trainers with experience. They help to the students all the way. Very friendly and helpful . end of the course they arranged me for interview , i have got select as the design engineer. i am very happy with this institute and working with L&T. Thanks to Quickstep and all the team.

  • Zai Khan
    August 13, 2016 at 5:24 pm

    My name is Zai, have done Mechanical Cad course. I found one of the best Cad training centre , because here you can learn what industries are expecting from fresher , accordingly they teach us , i had a interview cal and i went to attend and in interview they asked me many qus….and they asked me to do a diagram . but i have do felt really happy i was selected for job. thank to Quickstep CAD centre.

  • sushila G
    August 13, 2016 at 5:13 pm

    Hieee, i have done architectural CAD course with this institute i ve good experience , this institute ve good trainer, highly experience, Teaching is really good, I understood clearly what ever they have taught me. They r very helpful to d students , after course compilation they arranged an interview . I easily clear and i joined , They help me start my career. Thanks to all Quickstep CAD Centre. N future i ll be doing other course also.

  • Hassan shaik
    August 6, 2016 at 6:22 pm

    i did PHP course here, it is a very good coaching centre, i have learn easily PHP course, this centre has good trainer, they supports for placement also, while learning had had many difficulties first few days… but they made me to understand easy-es way . i am really happy. this is best institute for PHP.

  • Prema G
    August 2, 2016 at 5:11 pm

    Hello. This is Prema i did SAP MM course .. i waana to tel who r all wants to to SAP course , I suggest to joined this Institute , Their fees is offer able N quality is very good, we can learn many things from real time consultant . way of teaching is excellent and explanation is really good, Environment friendly, luckily i found right place to do this course. they r very helpful to the students, They give more attention to the students.

  • Ayesha siddiq
    August 2, 2016 at 4:59 pm

    Hi friends I have done Master Diploma In Mechanical CAD course here, i have a very good experience with this Cochin centre , they teach us very good, and i have learn perfectly all the software, when i attend the interview i was able to answer perfectly , because of they taught me properly mead me understand every thing . teachers are ll highly qualified and experienced, i found a excellent place to learn this course . Thanks to all.

  • Syed saifulla khan
    July 22, 2016 at 6:29 pm

    Hi …. Guys my name is KHAN I have done java J2ee And PHP course I am a CS student . I had to do my final year project , so i have done course in this this Coaching centre, I found this is the right place to do course , This people are really good they gave us individual attention. they made me to understand what is technologies . I was able to do finale year project without support of any one. I really thanks to this Institute they made me prefect in IT, Thanks to Quickstep and Team

  • Deviyalakshmi .S
    July 22, 2016 at 5:43 pm

    Hiee… Everyone I m Deviya I have successfully Completed My Master Diploma In Civil..Architectural CAD Course. . being a fresher i was struggling for a job, so i decided to do some course which wl help to to start my career. so i have done the course and as i expected i started my career, While doing course I got a very experienced faculty . i have learn perfectly. End of the course they help me to get a job . i am happy. All are friendly and helpful… This is the best Institute for CAD Courses . Thanks to everyone and Quickstep.

  • Mohammed yeshan
    July 22, 2016 at 5:26 pm

    Helooo i have done C C++, Java, & PHP course here . I have learn perfectly, my trainer was well experienced . Teaching is really good, This is one of the best Training Institute , End of the course they help me to get a job, due to this institute i am able to start my professional life. I am really thanks full to Quickstep . They train me such away to work as the professional .

  • srinivas N
    July 22, 2016 at 11:06 am

    I am srinivas done C c++, Java with PHP, I am very happy to this Institute , faculty was very good i had learn properly, I was able to do my final year college project , I got more attention, this is best to best institute to learn c c++, java, Php even any other course . They help me to get my part time job also, I am doing part time job also and as usual doing Higher studies for my future growth. if any one looking Course or job ……. many many thanks to sir ANd quickstep

  • Shilpa J
    July 22, 2016 at 10:51 am

    Hieee, I have done SAP SD course with this Institute . I had a such a unforgettable experience with this institute, Because Their teaching excellent they gave more attention to their students, They are very cooperative, i had a individual attention, Since I was fresher they arranged me for interview with few company . Finally i got select and i am working in one the multinational company , i would like to tel all who are looking for good training Visit once to this institute, even environment also really good. Thanks to Quickstep.

  • Javad Shaik
    July 22, 2016 at 10:49 am

    Myself JAVAD I did Java AND PHP Course in this Institute, I have Learn more then my expectation, I m a CS student, recently passed out , I ws hunting foe job one of my friend suggested me to do this course. i did this course here i had good service, End of the course i got Placement Assistance, I am very happy with this institute , so how i found best place to do course and because of their help i could start my professional Carrier . Thanks to Quickstep TEAM And my trainer.

  • R. Rajesh
    July 22, 2016 at 10:37 am

    Heloo. Recently I have completed Master diploma In Mechanical CAD Course Here, I have spend 7-8 monts I got really good coaching Class , I m very happy , classes were really good. Faculty was highly experience, They taught me very wll. Environment also really, They are friendly wit everyone , They very helpful to the students , They asst…. me for job, and i felt this is the one of the best Institute to do CAD Course, i am missing my sir.

  • Shilpa J
    July 22, 2016 at 10:24 am

    Hieee, I have done SAP SD course with this Institute . I had a such a unforgettable experience with this institute, Because Their teaching excellent they gave more attention to their students, They are very cooperative, i had a individual attention, Since I was fresher they arranged me for interview with few company . Finally i got select and i am working in one the multinational company , i would like to tel all who are looking for good training Visit once to this institute, even environment also really good. Thanks to Quickstep.

  • Sanjay
    July 9, 2016 at 6:18 pm

    I have learn Architectural CAD here. I have very good experienced with this institute. When i came to this place for enquiries . They suggested me some course according to my qualification. i did as they have suggested me. And they help me get a job. who is my faculty he explained me very wll. i understand perfectly . I had a very good friendly trainer … With good environment. I felt right place where we can get carrier path . Thanks to quickstep who brought me to this position.

  • Shivakumar.m
    July 9, 2016 at 6:11 pm

    Hi myself shivakumar i have completed my SAP-SD and , CRM Course in this Institute , Being a fresher I was Facing lots of problems to get a job , end of the course this Institute Arranged me a interview for me , I attend that interview and i got select . Now i am in company s i started my professional care…..re , this INSTITUTE have experience Trainer , The way they teach us everybody can understand easily , since I was fresher i did not know what is called job. They taught me very well. They are rally friendly and cooperative, They help me to reached this place. Thank to Quickstep Team .

  • Ajay .s
    July 9, 2016 at 5:39 pm

    Hiiiiiiii
    I am Ajay doing final year engineering. i joined C,C++, Java course ,i have successfully completed the course . i am rally happy because i learn every concept perfectly they made me understand what is called programming , because of this course i am able to do my own project and i had campus selection i got placed in one of the reputed company. I felt this is the institute to learn Programming course. I refer my friends they are doing course, they also told me they are really happy. Thanks to Quickstep.

  • Nayana G.S
    July 9, 2016 at 5:37 pm

    I am Nayana i did C,C++, Java, I wanted to share my experience with everyone , This Institute is one of the best institute because trainers are highly experience and their teaching is excellent , environment is really good all are friendly time flexibility . They help me to get placement. They send me for interview i was able to clear easily. I found best place to do course. I am really happy and I would like to refer everyone who are all welling to do such kind of Course..Thank to quickstep for teaching me well and getting job.

  • Ajay .s
    July 9, 2016 at 5:22 pm

    Hiiiiiiii
    I am Ajay doing final year engineering. i joined C,C++, Java course ,i have successfully completed the course . i am rally happy because i learn every concept perfectly they made me understand what is called programming , because of this course i am able to do my own project and i had campus selection i got placed in one of the reputed company. I felt this is the institute to learn Programming course. I refer my friends they are doing course, they also told me they are really happy. Thanks to Quickstep.

  • Manjunath . K.R
    June 20, 2016 at 5:22 pm

    hi myself Manjunath i have done Mechanical CAD Course here, I have learn more then what i expected. this institute teaches us very wll. Trainer is very good. explanation also excellent. . It is purely job oriented course. What industries expect from us , same kind of course they are teaching us. i am really happy to joined this institute. Thank to Quickstep bottom of my heart.

  • Suresh . G. Babu
    June 16, 2016 at 11:37 am

    HI I did Mechanical CAD course . their teaching is excellent . even environment is really good. I have learn perfectly. My trainer was very good…the way he explain me , its awesome. I m very happy to joined this course in this institute.hey r u planing to do CAD course this is right place to do.Have very good placement support also.

  • Pradeep.m
    June 14, 2016 at 7:10 pm

    I am Pradeep I have done SAP SD course . i wanted to shear my experience with you. While doing this course i have learn many things . Trainer are highly experienced , teaching is very very good. Practical classes look like real time work, teaching is excellent. All the subject they teach very well. They are very good in placement also. this is one the institute . if you people are planning to learn SAP , This is the best place.

  • Billesh Kumar
    June 14, 2016 at 4:54 pm

    Hi!!!!! This Belesh I joined for CIVIL CAD course in this institute. I have properly . What they taught me its purely industrial based . after learning course i tray for job, And i have been selected , teaching is really Good. Faculty explained me every step of all the syllabus. their teaching method is really super . I felt this one of the best institute to do CAD course. Thanks to Sir Who teach me CAD.

  • Heena Tabussum
    June 9, 2016 at 8:05 pm

    Hello , this is Heena I have done Mechanical CAD Course in this institute. In would like to tel you this is the best place to do CAD courses. i found that while during this course period . well experienced trainer, their explanation is very good , teaching is very good. i learn perfectly each and every step . now i am working in a company . end of the course they help me to find a job, they placed me . so I wanted to tel tanks team of the quickstep.

  • Deepak kumar
    June 9, 2016 at 7:50 pm

    I have learn Architectural CAD here. I have very good experienced with this institute. When i came to this place for enquiries . They suggested me some course according to my qualification. i did as they have suggested me. And they help me get a job. who is my faculty he explained me very wll. i understand perfectly . I had a very good friendly trainer … With good environment. I felt right place where we can get carrier path . Thanks to quickstep who brought me to this position.

  • Balaji .M
    June 9, 2016 at 7:34 pm

    Helooooooo. Myself Balaji I have done course in This centre. it was SAP MM. they gave me such a excellent training. Even those I am fresher, They help me to get a job. their services is really good. Trainer is highly experienced and explanation is very good. They are all friendly and very helpful . I could say this is one of the best institute in Banglore.

  • Dinesh Kumar .S
    April 14, 2016 at 7:47 pm

    Hi Myself Dineshkumar I did SAP ABAP course here. this institute is really good. Trainer is highly experience person who have taught me . He teaching is excellent he made me understand each and every step of topics. since i am fresher they gave me interview skill based on SAP. Recently I got an opportunity for interview . I got select and i start working with UPH Infotech. Thank you Sir.

  • Priya J.
    April 14, 2016 at 7:34 pm

    Heloo. Everyone this priya here, I would like to shear my experience with u. which i had with quickstepCAD Centre R.T. Nagar. i have done Master Diploma in Mechanical CAD. i have learn Auto cad, catia, and Hypermesh . They have provide me very good service . I m really happy with this institute. I found this is the one of the super best place to learn CAD course. And End of Course they placed me in company. now i have a very good job because of this institute. I wanted to refer every one who are will to do CAD course. Thank to Quickstep.

  • Manish m.j
    February 25, 2016 at 5:42 pm

    Hi.my self manish. i have done Interior Design course in this institute , that help me lots to do 2d, 3d. project. i was not able to do my work before this course . but now i can do it as for the my requirement,I am really happy to say that , I have got a professional career . now i am heaving more confidence to handle my project.

  • Basuraj .c
    February 25, 2016 at 5:21 pm

    Hi i have learn Civil CAD course here. I have good experience wit this people, they are all very good , my trainer had excellent experience and teaching ws reall good. i feel i found one of the best place . because environment also good, flexible time, all are very cooperative, end of the course they help me to find a job,

  • shrikanth .M
    February 24, 2016 at 7:17 pm

    I have done sap Fico course from this institute , i have learn properly. I had very experience trainer who had taught me, she explain me many time one topic because as i am a slow learner, but she made me understand everything. now i am able to work on this tool. recently they send me for interview … i was able to clear and i got a job. I want to tell thanks to mum who Taught me,

  • sunitha. L
    February 24, 2016 at 5:42 pm

    myself Sunitha , I am a mechanical Engineer , i have done Auto CAD, Catia, hypermesh in this institute, I have enjoy while doing course. because its very interesting and, the way trainer explain me i understand clearly. their service is really good. and end of the course they help me to get a job, few days latter i got placed . so I find this is the one of the best institute in Bangalore.

  • Nagaraj k
    February 24, 2016 at 5:16 pm

    Helooo everyone,

    I have learn SAP S.D, course from this institute . i have had such a excellent experience, because who taught me this S.D, He is highly experience person, his way of teaching really good. he made me understand each and every step of syllabus, After this course they schedule me interview with one of the company . And they help me to get into the company… with excellent package .

  • Santosh Kumar
    February 24, 2016 at 4:59 pm

    Hi, This is santosh here, I would like to share my experience with all of u.I have done SAP HR.course in this institute and as soon as i finished course, i got a job opportunity thro…. this institute … they have send me one of the reputed company … I got a job . so i would like to thankx to this institute…. they help me to start my Professional Career.

  • Shiva kumar
    December 3, 2015 at 5:34 pm

    Hi, I did Diploma in Civil_ Architectural CAD Course, I could say this is one of the best institute, for CAD. They are all experienced… The way they explain me. I understand perfectly. End of the course they have send me for interview.. and got select.

  • Rahim
    December 3, 2015 at 5:24 pm

    Hi, I have done SAP MM course, I got such a good trainer, Trainer was well experienced, and Helpful . What ever i learn I am able to use in my work. I would like to say thanks to my trainer .

  • Maruthi
    November 25, 2015 at 8:22 pm

    Hi i am maruthi I did SAP MM Course over here, Their teaching is good. They explanation is good . trainers are friendly , I really enjoy while doing this course, They have strong Placement support, I would like suggest to fresher students, This is one of the best institute which i found and they help me to start my career.

  • R.Ramesh
    November 25, 2015 at 6:12 pm

    I have completed Management information System ( MIS) Course . I am really happy and satisfied.After doing this course I had many different job opportunity.I am just a B.Com student. But this course gave me opportunity to work with MNC. Package also good.. And what they taught me it is really helping me in to day to day works.

  • Manjunath .S
    November 24, 2015 at 8:19 pm

    I have completed SAP FICO. I have learn properly I really satisfied . My trainer was very experienced person , i have learn many things which is been used in real time project. End of the course they have send me for interview …. and i got select now i am working with Globalsoft PVt.

  • zameer khan
    November 24, 2015 at 7:27 pm

    myself zameer khan, i have done Auto CAD civil, in this institute … they teach me very good. i am satisfied with the training.. and the help me to get placement.
    thank you

  • Tannuja
    November 19, 2015 at 4:55 pm

    I have done Diploma in Civil- Architectural CAD course in this centre . They taught me very ll i understood clearly. atmosphere was good while doing this course. I enjoy also i could learn many things which help me every aspect of life.

    Thank you
    Tannuja
    7768329865

  • sameer
    November 19, 2015 at 10:21 am

    i have competed my diploma in programing course in quickstep… gained a good konowled and expeianced in partical.. quick step refear me a good jobs opurtunity .. send me to an interviews… good training and good placemnts are provived in quick step computer center

  • shashikala
    November 19, 2015 at 10:17 am

    hi, my self shashikala i have did my sap fico course in this center…. a very good explanation has been done over hear a over view a subject has been givin.. which can make us understand it easily… good envornament ang good training has been provided hear….

  • simran
    November 19, 2015 at 10:09 am

    i have did my cad course in this institue
    i got a good knowledge and training and after complition of it i job placed in the same field worked under civil structures

  • sajeet kumar Rana.
    November 18, 2015 at 6:52 pm

    I recently completed Mechanical CAD course in this institute. This institute is one of the best institute comparer to others, because they teach us based on our requirement… as soon as we complete our course we can utilizeeeee….. it is not going be waste.

  • Harshita .S
    November 18, 2015 at 6:39 pm

    I have completed ASP Fico, course was excellent . I am completely satisfied. all the staff are good. I had flexible timing,they arranged a job for me . so now i am able to start my career. i am working with CMC Groups,

  • jayashree S.P
    November 18, 2015 at 4:32 pm

    I have done Diploma In Mechanical CAD Course . I have learn Quickly & perfectly with out facing any kind of problem. Trainers are really good. What they are teaching it is really outstanding. And they gave me placement support also.

  • shivakumarR.
    November 17, 2015 at 5:11 pm

    I am shivakumar. I did diploma Course in Civil-Architectural CAD. what ever they taught me, industrial job oriented content.that help me to start my career.

  • Asha .D
    November 17, 2015 at 4:38 pm

    I have completed SAP HR. i got very service . I m really happy. trainee was really good. I have learn many things . it was externally helpful to my profession. Thank to entire team .

  • sujesh k.
    November 16, 2015 at 4:07 pm

    Hi, I have done SAP MM Course here. they taught me very ll. Trainer was really good… experience with friendly also. good atmosphere fixable time. They help me to getting job… now I am working with one of the MNC.

  • simran
    November 14, 2015 at 5:55 pm

    i have completed my diploma in civil cad course in quick step computer center i have satisfied by this course and the trainer are well trained and highly experianced and the envornament is also good

  • heena taj
    November 14, 2015 at 5:19 pm

    i have completed my tally course in this institute i have well satisfied and reaced an certificate issued by iso all over international also and after complication of this course in this center i jot placed in well reputed company wonking under acoounting department

  • Syed hassim
    November 14, 2015 at 5:19 pm

    Hi, I have completed SAP MM course. I have such a very good experience with this institute . as soon as i finish my course. they send me for interview. i got select. And i started working with a company. I am really happy . They help me lots to start my career Thanks to all Quickstep team.

  • Praveen Kumar
    November 14, 2015 at 5:01 pm

    This is praveen Kumar , I did SAP FICO, Course here. They Give me very good trainee. The way she explain me about the subject. I understand Perfectly. And they refer me a company & got select . What she thought me it was really helpful. I am working as a SAP Consultant. Thanks to Quickstep entire team .

  • LALITH.
    November 14, 2015 at 11:44 am

    Hi frinds i got a job in TCS. i did diploma course in mechanical CAD, institute refer me this company. i got select with good package. whatever they taught me based on that i got a job. this is one of the best institute to do CAD course.

  • siddiq.
    November 14, 2015 at 11:33 am

    I have done CAD course in Quickstep. R.T. Nagar. Their teaching is excellent. they help me to get a good in MNC. Their services are really good. if u welling to do CAD course i wouold like to refer this institute.

  • sadiq
    November 7, 2015 at 5:29 pm

    I have done Web design course and got placed in Global Soft Pvt ltd. teaching is good and i created my website.

Add a review

You May Also Be Interested In