space
Search Courses  in 

Get COURSE FEES & Discounts from BEST CCNP Wireless Institutes in Jaya Nagar East!

 

My Name

My Mobile Number

My Email ID

 

CCNP Wireless Training Centers, Institutes & Training Course Classes in Jaya Nagar East- Listings as of May 25, 2018.

As on May 25, 2018, We have total of 6 CCNP Wireless training institutes in and around also near to Jaya Nagar East area in Bangalore with best training centers, institute address, Phone numbers, course fee, working hours and student reviews listed.

 

 

training institutes Nass Technologies pvt ltd
Bangalore - J P Nagar
Best Institute
Address: 8/A, 1st cross road,phase 2,j p nagar, Bangalore 560078 google map of 12140

Established in 2004, Nass Technologies has a highly process oriented approach towards support and development with strong project management skills.Nasstechnologies provides Best-of-the-Breed solution Nass Technologies pvt ltd provides best CCNP Wireless Training, CCNP Wireless Training classes & Realtime Training J P Nagar.
 
training institutes Golden Lotus Training and Consultancy Service
Bangalore - Jaya Nagar East
No Reviews. Write a Review
training institute

Golden Lotus Training and Consultancy Service provides best CCNP Wireless Training, CCNP Wireless Training classes & Realtime Training Jaya Nagar East.
 
training institutes FG Global Training Private limited
Bangalore - Jaya Nagar East
training institute

FG Global Training Private limited provides best CCNP Wireless Training, CCNP Wireless Training classes & Realtime Training Jaya Nagar East.
 
training institutes Astrid Ip4 Networkers
Bangalore - Jaya Nagar East
No Reviews. Write a Review
training institute
Address: 1033 27th cross above nike show room Jayanagar 9th block Jaya Nagar East Bangalore-560068

Astrid Ip4 Networkers provides best CCNP Wireless Training, CCNP Wireless Training classes & Realtime Training Jaya Nagar East.
 
 
training institutes ITTS
Bangalore - Jaya Nagar East
No Reviews. Write a Review
training institute
Address: ITTS, 487/109, East end main road, Jayanagar 9th block, Bangalore-560 069.

ITTS provides best CCNP Wireless Training, CCNP Wireless Training classes & Realtime Training Jaya Nagar East.
 
First << 1  >> Last

 

 

 

Related Training Courses for CCNP Wireless in jaya-nagar-east

 

 

CCNP Wireless course Content / syllabus at jaya-nagar-east, bangalore.

We gathered most widely used CCNP Wireless course content used by training institutes in jaya-nagar-east,bangalore. The CCNP Wireless course syllabus covers basic to advanced level and it may vary based on CCNP Wireless training classes offered in jaya-nagar-east.

 

I. Conducting Cisco Unified Wireless Site Survey

A. Prepare for the Site Survey
1.Identify customer requirements, such as:
2.Business and RF application needs (voice, data, location, and so on)
3.Industry vertical
4.Customer questionnaire
5.Identify customer facility requirements
6.Identify customer requirements for type of client devices
7.Identify regulatory issues
8.Identify safety and aesthetic considerations
9.Assess existing network infrastructure
10.Assess logistical considerations (resources, time, access, deployment requirements, and so on)
11.Determine 802.11n impact on network infrastructure

B. Plan for the Site Survey
1.Select proper survey mode
2.Determine proper deployment characteristics
3.Select survey equipment
4.Determine site survey best practices for customer environment
5.Identify impact of material attenuation
6.Identify survey documentation needed for customer report

C. Conduct the Site Survey
1.Conduct a Layer 1 survey (Cisco Spectrum Expert)
2.Select proper antenna to conduct the site survey
3.Conduct the Layer 2 site survey for indoor environment
4.Conduct the Layer 2 site survey for outdoor point-to-point and point-to-multipoint networks
5.Conduct the Layer 2 site survey for outdoor mesh network

D. Design the RF Network
1.Determine infrastructure requirements
2.Determine the AP count and subsequent controller and license requirements
3.Generate the WLAN design documentation

E. Conduct Post Deployment Assessment
1.Verify RF coverage
2.Verify network applications and performance
3.Reconcile any deployment issues
4.Assemble and deliver installation report to customer

II. Implementing Cisco Unified Wireless Voice Networks

A. Describe and design voice over wireless architecture
1.Describe voice as it applies to the wireless network
2.Design wireless for voice
3.Utilize other design considerations, as per the voice design guide (VAD, MoH, Load balancing, and so on)
4.Validate wireless network design for voice readiness
5.Validate infrastructure requirements for end-to-end voice over wireless (CUCM, CUCME, QoS, ACS, DHCP,TFTP, routers, security devices, etc.)
6.Describe VoWLAN integration with cellular providers

B. Implement VoWLAN
1.Configure wireless client devices
2.Configure the WLAN for VoWLAN
3.Troubleshoot VoWLAN implementation

C. Implement QoS for wireless applications
1.Describe and implement general considerations for wired QoS
2.Describe and implement the appropriate Wireless QoS deployment schemes
3.Configure WCS/WLC for QoS
4.Reference most current best practice guidelines

D. Implement multicast over wireless
1.Describe general multicast concepts
2.Describe implications for multicast in 802.11
3.Configure multicast in a wireless network
4.Troubleshoot multicast in a wireless network

E. Prepare the wireless network for video/high-bandwidth applications
1.Describe benefits of 802.11n for video
2.Determine bandwidth requirements for specified applications
3.Identify application specific wireless network requirements

III. Implementing Cisco Unified Wireless Mobility Services

A. Implement Location Based Services
1.Describe the impact of direct-attached storage (DAS) for location-based services
2.Tracking mobile clients, including active radio frequency identification (RFID) tag, Wi-Fi devices, and active interferers
3.Describe the applications of RFID, Chokepoint, and TDoA Tags, including compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
4.Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
5.Configure, generate, and interpret location and event notifications
6.Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
7.Design access point (AP)/antenna deployment model for location
8.Describe location techniques

B. Design and deploy WLAN infrastructure for mobility
1.Configure single Service Set Identifier (SSID) designs w/mobility
2.Analyze implications of L2 and L3 roaming
3.Implement high availability
4.Troubleshoot AP join process using the following solutions
5.Implement the following Cisco Unified Wireless best practices
6.Define and implement mobility groups/list
7.Adjust authentication/EAP timers
8.Tune RF environment for context aware services
9.Troubleshooting intercontroller communications

C. Implement MSE architecture
1.Describe Cisco Mobility Services Engine (MSE) capabilities and integration with wireless network architecture
2.Deploy context-aware services for specific environments
3.Integrate third-party applications
4.Integrate and manage MSE with Cisco WCS
5.Maintain MSE
6.Troubleshoot MSE operations

D. Implement and manage indoor and outdoor Mesh
1.Describe wireless Mesh and its benefits
2.Describe the following Mesh operation modes:
3.Implement Mesh
4.Describe Mesh convergence
5.Utilize Cisco WCS for Mesh monitoring
6.Utilize workgroup bridges

E. Implement advanced services and manage with Cisco WCS and Navigator
1.Install and maintain Cisco WCS/Navigator and perform the following tasks
2.Describe Navigators role, features, and functions
3.Implement Cisco WCS partitioning and Navigator domains
4.Implement time of day AP power savings
5.Implement scheduled WLAN availability
6.Create and customize Cisco WCS reports
7.Configure background tasks
8.Configure and apply controller and access point templates
9.Monitor and convert autonomous APs
10.Configure WLC auto-provisioning
11.Utilize configuration auditing in Cisco WCS

IV. Implementing Advanced Cisco Unified Wireless Security

A. Integrate client device security
1.Describe Extensible Authentication Protocol (EAP) authentication process
2.Configure client for secure EAP authentication
3.Configure the AnyConnect client
4.Describe the impact of security configurations on application and client roaming.
5.Troubleshoot client wireless authentication issues, such as packet analyzers, debugs, logs, Cisco Wireless Control System (WCS), and access control server (ACS)
6.Identify client security risks (driver update, MS hot fixes)

B. Design and integrate wireless network with NAC
1.Describe the architectures; inband, out-of-band, agent vs. agentless, and the Cisco Network Admission Control (NAC) appliance.
2.Describe the high-level authentication process flow
3.Configure the WLC for Network Access Controller (NAC)
4.Verify wireless authentication with NAC

C. Implement secure wireless connectivity services
1.Configure authentication
2.Configure autonomous AP for RADIUS authentication
3.Configure management frame protection on clients, APs and controllers
4.Configure IBN (RADIUS based VLAN and ACLs, AAA override)
5.Define ACS parameters for integration with wireless network
6.Define client and server-side digital certificate requirements
7.Implement ACLs on controller
8.Troubleshoot secure wireless connectivity services

D. Design and implement Guest Access services
1.Describe the architectures for guest access services
2.Configure guest access accounts
3.Configure controller web authentication
4.Configure the anchor and internal controllers
5.Troubleshoot guest access issues

E. Translate organizational and regulatory security policies and enforce security compliances
1.Describe regulatory compliance considerations, such as HIPAA, PCI, SOX, and FERPA
2.Segment traffic into different VLANs, based upon
3.Configure administration security on controller and WCS
4.Manage WLC and WCS alarms
5.Utilize security audit tools

F. Configure native WLC security feature sets - IPS/IDS
1.Utilize WCS or controller for IDS and threat mitigation strategies
2.Identify and mitigate wireless vulnerabilities

G. Integrate wireless network with advanced security platforms
1.Describe end-to-end security solutions of Cisco and how they integrate with the Cisco wireless solutions
2.Describe the CUWN firewall port configuration requirements
3.Configure the controller for wired IPS/IDS
4.Configure wireless Intrusion Prevention System (IPS) (MSE)

 

 

Databytes Bangalore

 

Sgraph Bangalore

 

Realtime Signals Bangalore

 

IIHT Bangalore

 

RIA Institute of Technology Bangalore

 

Systems Domain Bangalore

 

Edusoft Training in  Bangalore

 

TIB BangaloreHybritic Informatics

 

java academy java j2ee training in bangaloreITBMS chennai Best Training Institute

 

Mazenet SolutionAIX Training in Delhi

 

shinelogics Infotech Velachery Chennaisap training institutes in chennai

 

IIHT Vadapalani Chennai

 

Training course fee & Discounts

 

 

   DMCA.com Protection Status